ChemLogic Dual Point Continuous Monitor

Model : ChemLogic 2
Point : 2 points
Measuring method : Colorimetric


The ChemLogic Continuous Dual Point Gas Monitor is the next generation of interference free, low maintenance colorimetric gas detection.

This system is simple to install and utilizes ¼” tubing to allow the sample to be drawn up to 45m.

The ChemLogic Continuous Dual Point Gas Monitor provides relay and analog outputs.
This new innovative gas detection system enables customers to experience advanced technology at a lower initial investment and reduced cost of ownership.



Detection Principal ChemLogic Technology
Gas Families Available See Datasheet file
Monitoring Points 2 points
Sample Distance 150ft(45m) 1/4″ OD 1/8″ID Teflon FEP
Exhaust Tubing 25ft(7.62m) 1/4″OD 3/16″ID
Display HMI
Local Alarm Indication Visual HMI Display
Relay Outputs 6Amps Form C – Programmable Low and High Level, Fault
Operating Temperature 40F to 104F (5℃ to 40℃)
Dimensions H-12.5″(317.5mm) W-10.3″(260mm) D- 9″ (228mm)
Shipping Weight 30 lbs. 13.5 Kg
Operating Voltage 85-264VAC 50/60 Hz
Power Consumption Less than 1 Amp
Enclosure NEMA 4X
Analog Output 4-20mA (500 ohm max impedance)