ChemLogic Single Point Continuous Monitor

Model : ChemLogic 1
Point : 1 points
Measuring method : Colorimetric
Option : Z-Purge, Vortex & etc.


The ChemLogic Single Point Continuous Monitor provides field proven ChemLogic Technology
for the quick detection of low level toxic and corrosive gases.

The Z-Purge, Vortex Cooler/Heater and Weather Proof NEMA 4X enclosure options, provide maximum versatility allowing the CL1 to operate in extreme weather and hazardous locations.



Detection Principal ChemLogic Technology
Gas Families Available See Datasheet file
Monitoring Points 1 points
Sample Distance 150ft(45m) 1/4″ OD 1/8″ID Teflon FEP (Does not apply to Diisocyanates)
Exhaust Tubing 25ft(7.62m) 1/4″OD 3/16″ID
Display HMI
Local Alarm Indication Visual HMI Display
Relay Outputs 6Amps Form C – Programmable Low and High Level, Fault
Operating Temperature 40F to 167F (5℃ to 75℃)
Dimensions H-26″(66cm) W-18″(45cm) D- 10.5″ (27cm)
Shipping Weight 90 lbs (41 Kg)
Operating Voltage 85-264VAC 50/60 Hz
Power Consumption Less than 1 Amp
Enclosure NEMA 4X
Analog Output 4-20mA (500 ohm max impedance)
Purge Option 80-120PSI 10SCFM Min (3/8″ Tube Compression)
Vortex Cooler/Heater Option 80-120PSI 10SCFM Min (3/8″ Tube Compression)